Kesslund
Kesslund
VeloDock

VeloDock™ bike wall mount

$69.00

  • Heavy-gauge steel bracket
  • Rubber lining on the hook's contact point
  • Hook pivots up and down after mounting
  • Wall mount that lifts the bike off the floor

FREE GIFT

Free Gift - Folding Hex Key Wrench Set

FREE
Tracked Shipping
  • Mark your anchor points on a stud or solid wall material and drill the holes.
  • Fasten the steel bracket to the wall with the included hardware.
  • Hang the bike by the wheel on the hook, then pivot the hook up or down until the bike sits flush.
  • VeloDock adjustable wall-mount hook
  • Mounting hardware kit (screws and wall anchors)
  • Quick-start installation guide

We offer free shipping on orders over $150. Once your order is dispatched, the estimated delivery time is 5 to 12 business days depending on your location — tracking is emailed as soon as it ships.

Changed your mind? You can return your product within 90 days of delivery for a refund — see our Returns page for the full policy.

How the VeloDock wall mount is built

Heavy-gauge steel bracket

The bracket is made from heavy-gauge steel. It bolts to the wall with the screws and wall anchors in the kit, so you can mount it before the next trip.

Wall storage for small spaces

The bike hangs on the wall instead of standing on the floor. That leaves more room in a garage, basement or apartment for the rest of your packing and gear.

VeloDock

Rubber-lined hook

A rubber lining covers the point where the hook meets the wheel. Your rim rests on padding rather than bare metal each time you hang the bike or take it down.

Pivoting hook

After mounting, the hook pivots up and down. Adjust the angle so the bike sits flush against the wall, then load up the car for your next ride.

Frequently Asked Questions

Anchor into a stud, concrete or solid wood framing. Hollow drywall by itself is not a suitable base for a hung bike, so find a stud or use masonry anchors that suit your wall type.

The bracket is heavy-gauge steel and is meant for adult bikes. E-bike weight varies by model, so check your bike's weight and anchor into a stud or solid masonry.

No. A rubber lining covers the hook's contact point, so the rim rests on padding whenever you hang the bike or lift it off the wall.

Yes. The hook keeps pivoting up and down after installation. Tilt it until the bike sits flush against the wall.

The bracket is heavy-gauge steel, and the hook's contact point carries a rubber lining. The kit also includes screws and wall anchors for fixing it to the wall.

The hook opening takes tires about 7.5 cm (roughly 3 inches) wide. That covers road and hybrid bikes and many mountain bikes. Wider fat-bike tires will not seat in the opening.

Garages, basements and apartments are the usual spots. Pick a wall section with a stud or solid material, and leave enough room beside it to lift the bike on and off.

Yes, though you have to raise the bike to the height of the hook. The hook pivots, so you can adjust the angle until the wheel seats and the bike sits flush.

This bike wall mount installs by marking and drilling anchor points into a stud or solid wall material, then securing the steel bracket with the included hardware. The bike hangs by the wheel on the pivoting hook.

The kit includes one adjustable wall-mount hook, a mounting hardware kit with screws and wall anchors, and a quick-start installation guide. The bike hanger has a heavy-gauge steel bracket and a rubber-lined hook.
VeloDock

Ready to make it yours?

Get VeloDock at today's price with your free gift included — and a full 90 days to enjoy it.

Your free gift: Free Gift - Folding Hex Key Wrench SetFREE
90-Day Money-BackTracked Shipping
Secure Checkout
Tracked Shipping
Customer Support
Loved by our customers

VeloDock: A Bike Wall Mount with a Pivoting, Rubber-Lined Hook

VeloDock is a bike wall mount that lifts a bicycle off the floor and onto the wall of a garage, basement or apartment. The bracket is heavy-gauge steel, and the hook has a rubber lining at the contact point where the wheel rests.

As a bicycle wall mount, it holds the bike by the wheel. After installation the hook of this bike hanger pivots up and down, so the angle can be adjusted until the bike sits flush against the wall. The compact bracket sits close to the wall.

Installation starts by marking and drilling anchor points into a stud or solid wall material. The bike wall mount is then secured with the included screws and wall anchors, and a quick-start installation guide is in the box.

  • Heavy-gauge steel bracket
  • Rubber-lined hook
  • Hook opening fits tires about 3 inches wide or narrower
  • Fits road, hybrid and many mountain bikes

You may also like

PannierGuard

Bicycle Saddle Bags Storage

PannierGuard

$119.00

SpokeForge

Bike Multi Tool

SpokeForge

$79.00

Free gift included