Kesslund
Kesslund
Marlinox

Marlinox™ boat rod holder

$59.99

  • Hand-tightened clamp, so no drilling into your boat
  • Clamp opening spans 2 inches for rails and tracks
  • ABS body and corrosion-resistant hardware for salt water
  • Twist-lock ring holds the reel seat in the cradle

FREE GIFT

GroveNet Garden Netting

FREE$59.00
Tracked Shipping
  • Set the clamp on your boat rail, gunwale or kayak track and tighten the thumb screw by hand.
  • Slide in the rod and twist the security ring to lock the reel seat.
  • Loosen the side knob, set the angle, then tighten it and start fishing.
  • 1 Marlinox Boat Rod Holder
  • Packaging box

We offer free shipping on orders over $150. Once your order is dispatched, the estimated delivery time is 5 to 12 business days depending on your location — tracking is emailed as soon as it ships.

Changed your mind? You can return your product within 90 days of delivery for a refund — see our Returns page for the full policy.

How it holds your rod on the water

Clamp mount, no drilling

Marlinox tightens with a hand knob, and a textured base grips the rail by friction, so you mount it without tools or holes.

Swivel and tilt cradle

Drifting and trolling call for different rod angles. Loosen the side knob, rotate or tilt the cradle, then tighten it again, so the holder sits at the angle your technique needs.

Marlinox

ABS and corrosion-resistant hardware

The holder uses ABS with corrosion-resistant hardware, so the materials suit use on a boat in salt water.

Twist-lock security ring

A rod left in a holder can get tugged when a fish strikes. A rotating ring closes over the reel seat inside the cradle, so the rod stays seated until you turn the ring open.

Frequently Asked Questions

The adjustable clamp has a 2 inch (5 cm) opening and fits round rails and flat gunwales within that thickness.

No. The thumb screw tightens by hand, so there is nothing to drill or bolt.

The open-slot cradle takes spinning, casting and trolling rod handles. The front locking ring then closes around the reel seat to hold it in place.

The body is ABS and the hardware is corrosion-resistant. A textured base on the clamp grips the rail surface when you tighten the knob by hand.

Loosen the side tension knob, then swing the holder around its full 360 degrees or tilt it up and down. Tighten the knob again to hold the new angle.

Yes. The clamp is made for boat rails, gunwales and kayak tracks. Set it on the track, tighten the thumb screw by hand, then lock the rod with the ring.

The clamp base is textured and holds by friction rather than force. You tighten the knob by hand until the base sits snug against a metal rail or fiberglass surface.

You get one Marlinox Boat Rod Holder in its packaging box. Returns are covered by our 90-day returns policy.

This boat rod holder has an ABS body with corrosion-resistant hardware and a textured clamp base. The open-slot cradle takes spinning, casting and trolling handles, and a twist-lock ring closes over the reel seat.

The Marlinox clamp sits on a boat rail, gunwale or kayak track and tightens by hand with a knob. A separate side knob loosens to rotate or tilt the head, then tightens again.
Marlinox

Ready to make it yours?

Get Marlinox at today's price with your free gift included — and a full 90 days to enjoy it.

Your free gift: GroveNet Garden NettingFREE
90-Day Money-BackTracked Shipping
Secure Checkout
Tracked Shipping
Customer Support
Loved by our customers

Marlinox: A Boat Rod Holder for Rails, Gunwales and Tracks

Anglers on small boats often prop a rod against a seat or rail, where one hard strike can pull it into the water. A boat rod holder that clamps to the rail gives the rod a fixed place and leaves both hands free.

Marlinox tightens with a hand knob, so no drilling or tools are needed and the rail gets no new holes. The textured base grips by friction rather than force. The clamp fits round rails, flat gunwales and kayak tracks 2 inches thick or less, so it works as a jon boat rod holder. It also suits pontoons, where pontoon boat rod holders mount to the rail.

Among fishing rod holders for boats, this one adds:

  • A head that rotates and tilts for a drift or trolling angle
  • A twist-lock ring that closes over the reel seat
  • ABS body with corrosion-resistant hardware for salt water
  • Open-slot cradle for spinning, casting and trolling handles

You may also like

SonarPeak

Fish Finder

SonarPeak

$129.99

CastRidge Pro

Fishing Reel

CastRidge Pro

$119.99

CastRidge Pro

Fishing Rod For Beginner

CastRidge Pro

$99.99

CatchFlex

Tackle Pack

CatchFlex

$98.99

Free gift included